...
Saving and Loading profiles
We highly recommend starting with one of the profiles already in the library, then adjust it to suit your customer.
...
Give the profile a meaningful name (eg ABC Smart Charger with grid boost for Tesla 3, 50km/day)
...
Click on the “In addition to load profile” checkbox if the EV details mentioned are not a part of the consumption profile loaded on the Energy page.
| Info |
|---|
If “In addition to load profile” is not checked, make sure there is enough power in the consumption profile, as the load will activate only when the power is equal to or greater than the kW power value set in this section. |
...
The total energy consumption on the reports page will be the load profile from the Energy page, plus the load from the Smart Energy profile. If you are comparing a quote without a Smart Energy |
...
Profile to one that has a Smart Energy profile, make sure that the energy consumption on both are the same. |
Smart charge scenario
...
In this section, enter the details of when the EV will be plugged in for charging. The time ranges can be entered at an hourly level on the 24-hour clock. To specify multiple ranges for the same weekday, click on “+Weekly Range”.
...